Home-News-New Regulations: At the end of June, more than 30,000 "scattered and dirty" enterprises were banned in full compliance with regulations, especially those involved in VOCs direct discharge and scattere
New Regulations: At the end of June, more than 30,000 "scattered and dirty" enterprises were banned in full compliance with regulations, especially those involved in VOCs direct discharge and scattere
From: Inrront
Date：2017-07-06
Notice of the Henan Provincial Department of Environmental Protection on Printing and Distributing the Work Plan for the Special Treatment of Volatile Organic Compounds in Henan Province in 2017. The provincial and municipal governments directly under the jurisdiction of the county (city) Environmental Protection Bureau, Zhengzhou Airport Economic Comprehensive Experimental Zone Municipal Construction Environmental Protection Bureau:
In order to deepen the battle to win the battle against atmospheric pollution, it is difficult to do a good job in the special treatment of volatile organic compounds, and we will continue to increase the number of excellent days. Our department has researched and formulated the "Special Plan for the Management of Volatile Organic Compounds in Henan Province in 2017", which is now issued. For you, please combine the actual situation and conscientiously implement it.
The "Proposal" proposes to adhere to the governance ideas of "source substitution, process control, terminal treatment, illegal punishment, and illegal ban", focusing on pollution control of VOCs such as petroleum refining, petrochemical, industrial coating, packaging and printing, and chemical industry. Strengthen the management of industrial source VOCs, etc.
The "Proposal" proposes that before June 30, 2017, the province will fully complete 3,609 petroleum refining, petrochemical, industrial coating, packaging and printing, chemical industry VOCs pollution comprehensive management tasks; motor vehicles, gas stations, car repair, catering The emission of VOCs in the soot and other industries has been effectively treated, and the national control standards and requirements have been stabilized. According to the regulations, the 36600 “scattering and pollution” enterprises that have been identified are eliminated. In particular, small sprays, small workshops, and “black refueling” involving VOCs emissions. Stations and other unorganized emissions companies.
VOCs refer to organic compounds involved in atmospheric photochemical reactions and are important precursors for the formation of ozone (O3) and fine particulate matter (PM2.5) pollution, which are important factors affecting the number of days. The scope of governance mainly includes: industrial sources, focusing on chemical industries such as petroleum refining, petrochemicals, pesticides, pharmaceuticals and plastic products manufacturing, industrial coatings such as automobiles, furniture, engineering machinery, steel knots, coils, etc., packaging and printing industry; Traffic sources, the focus is on vehicle oil products, motor vehicles, gas stations, etc.; life sources, the focus is on car repair, catering soot, etc.; unorganized emission sources, focusing on small spray, small workshops.
The "Proposal" proposes to implement comprehensive rectification of VOCs in the industrial coating industry. Before June 30, 2017, 2,365 manufacturing enterprises in the province, such as automobiles, furniture, construction machinery, steel structures, coils, and containers, must meet the standards. VOCs emissions must meet the Volatile Organics Unorganized Emission Control Standards and Coatings. , Ink and Adhesive Industry Air Pollutant Emission Standards.
(1) Automobile manufacturing industry. Accelerate the promotion of VOCs emission control in enterprises such as vehicle manufacturing, modified automobile manufacturing, and auto parts manufacturing in the province. Promote the use of low-volatility coatings such as high solids and water, and use compact coating processes such as “three coats and one bake” or “two coats and one bake”; establish an organic waste gas separation and collection system, and the organic waste gas collection rate of vehicle manufacturers Not less than 90%, other automobile manufacturing enterprises shall not be less than 80%; end-treatment measures such as incineration shall be adopted for the exhaust gas generated in the steps of painting, leveling and drying. The comprehensive removal rate of VOCs in vehicle manufacturing enterprises should reach 70% or more, and the comprehensive removal rate of OCs in other automobile manufacturing enterprises should reach 50% or more.
(2) Furniture manufacturing industry. Focus on the province's large-scale wooden furniture enterprises, vigorously promote the use of water-based, UV-curing and other low-volatility coatings, the replacement ratio reached more than 30%, to verify the company's product output and paint purchase orders; vigorously promote the use of water-based adhesives, The replacement ratio is over 50%, which is verified by the company's product output and the adhesive purchase order. Strengthen the collection and treatment of waste gas, the organic waste gas collection rate is not less than 80%, and the end treatment measures such as incineration should be adopted for painting and drying waste gas. The comprehensive removal rate (including raw material substitution) of VOCs in wooden furniture manufacturing enterprises should reach 50% or more.
(3) Construction machinery manufacturing industry. Promote the use of high-solids coatings, the use ratio of more than 20%, to verify the company's product output and paint purchase orders. Strengthen the collection and treatment of waste gas, the organic waste gas collection rate is not less than 80%, and the painting and drying waste gas are treated by incineration. The comprehensive removal rate (including raw material substitution) of VOCs in construction machinery manufacturing enterprises should reach 50% or more.
(4) Steel structure manufacturing industry. Vigorously promote high-solids coatings, the use ratio of more than 20%, to verify the company's product output and paint purchase orders. Gradually eliminate the open-air spraying of steel structures, comprehensively promote the steel structure manufacturing enterprises to enter the workshop operation, and construct waste gas collection and treatment devices. The comprehensive removal rate (including raw material substitution) of VOCs in steel structure manufacturing enterprises should reach more than 30%.
(5) Coil manufacturing industry. The use of mechanized automatic roll coating technology is widely promoted; the collection of baking waste gas is enhanced, the collection rate is over 90%, and efficient treatment measures such as incineration are supported. The comprehensive removal rate of VOCs in coil manufacturing enterprises has reached more than 80%.
(6) Container manufacturing industry. In the whole process of sanding, in-box painting, exterior coating, chassis painting and wood coating, all the water-based coatings are used instead of solvent-based coatings. The replacement ratio is over 80%, and the company's product output and coating purchase order are used. Verify. For a sanding process, the roll coating process is promoted; the exhaust gas collection and treatment is enhanced, the organic waste gas collection rate is not less than 90%, and efficient treatment facilities such as solvent recovery and catalytic combustion are supported. The comprehensive removal rate (including raw material substitution) of VOCs in container manufacturing enterprises should reach 80% or more.
The "Proposal" proposes to strengthen the comprehensive management of VOCs in other industrial sectors. All localities should combine local industrial structure characteristics and VOCs governance priorities, and select other industrial industries to carry out VOCs governance according to local conditions. The electronic information industry should focus on strengthening the emission control of VOCs in solvent cleaning, lithography, gluing, painting, etc.; the footwear industry should focus on strengthening facial seam bonding, molding, group bottoming, painting, foaming, injection molding, printing, cleaning, etc. Process VOCs emission control; textile printing and dyeing industry should focus on strengthening emission control of printing and dyeing and finishing processes VOCs, strengthen the control of exhaust gas and printing waste gas; wood processing industry should focus on the treatment of VOCs in drying, gluing and hot pressing processes.
The "Proposal" proposes to comprehensively strengthen the prevention and control of VOCs in living sources. In terms of VOCs governance in the auto repair industry, the “Proposal” proposes to comprehensively ban open-air and open-air auto repair spraying operations. Promote the use of low-volatility coatings such as water-based and high-solids, and promote the coating process with high coating efficiency such as electrostatic spraying. Process operations such as painting, leveling and drying must be placed in the paint booth, using solvent-based coatings. The spray gun should be sealed and cleaned, and the generated VOCs should be collected and introduced into the treatment facility. Before June 30, 2017, the VOCs of 404 auto repair enterprises will be completed, and the comprehensive removal rate of VOCs will reach 50% or more.
The "Proposal" proposes to rectify and revoke the "scattering and pollution" enterprises involved in VOCs. Before the end of June 2017, 36,600 “scattering and pollution” enterprises identified in the province must be fully rectified according to the law, especially for chemical, casting, coating, ink, adhesive, organic solvent, etc. as early as possible. VOCs are directly in line with “scattering and pollution” enterprises, strictly in accordance with the standards of water and electricity cut-off, equipment removal, raw materials removal, and the “four in place” of the licenses are revoked, and resolutely put an end to the resurgence.
In order to deepen the battle to win the battle against atmospheric pollution, it is difficult to do a good job in the special treatment of volatile organic compounds, and we will continue to increase the number of excellent days. Our department has researched and formulated the "Special Plan for the Management of Volatile Organic Compounds in Henan Province in 2017", which is now issued. For you, please combine the actual situation and conscientiously implement it.
The "Proposal" proposes to adhere to the governance ideas of "source substitution, process control, terminal treatment, illegal punishment, and illegal ban", focusing on pollution control of VOCs such as petroleum refining, petrochemical, industrial coating, packaging and printing, and chemical industry. Strengthen the management of industrial source VOCs, etc.
The "Proposal" proposes that before June 30, 2017, the province will fully complete 3,609 petroleum refining, petrochemical, industrial coating, packaging and printing, chemical industry VOCs pollution comprehensive management tasks; motor vehicles, gas stations, car repair, catering The emission of VOCs in the soot and other industries has been effectively treated, and the national control standards and requirements have been stabilized. According to the regulations, the 36600 “scattering and pollution” enterprises that have been identified are eliminated. In particular, small sprays, small workshops, and “black refueling” involving VOCs emissions. Stations and other unorganized emissions companies.
VOCs refer to organic compounds involved in atmospheric photochemical reactions and are important precursors for the formation of ozone (O3) and fine particulate matter (PM2.5) pollution, which are important factors affecting the number of days. The scope of governance mainly includes: industrial sources, focusing on chemical industries such as petroleum refining, petrochemicals, pesticides, pharmaceuticals and plastic products manufacturing, industrial coatings such as automobiles, furniture, engineering machinery, steel knots, coils, etc., packaging and printing industry; Traffic sources, the focus is on vehicle oil products, motor vehicles, gas stations, etc.; life sources, the focus is on car repair, catering soot, etc.; unorganized emission sources, focusing on small spray, small workshops.
The "Proposal" proposes to implement comprehensive rectification of VOCs in the industrial coating industry. Before June 30, 2017, 2,365 manufacturing enterprises in the province, such as automobiles, furniture, construction machinery, steel structures, coils, and containers, must meet the standards. VOCs emissions must meet the Volatile Organics Unorganized Emission Control Standards and Coatings. , Ink and Adhesive Industry Air Pollutant Emission Standards.
(1) Automobile manufacturing industry. Accelerate the promotion of VOCs emission control in enterprises such as vehicle manufacturing, modified automobile manufacturing, and auto parts manufacturing in the province. Promote the use of low-volatility coatings such as high solids and water, and use compact coating processes such as “three coats and one bake” or “two coats and one bake”; establish an organic waste gas separation and collection system, and the organic waste gas collection rate of vehicle manufacturers Not less than 90%, other automobile manufacturing enterprises shall not be less than 80%; end-treatment measures such as incineration shall be adopted for the exhaust gas generated in the steps of painting, leveling and drying. The comprehensive removal rate of VOCs in vehicle manufacturing enterprises should reach 70% or more, and the comprehensive removal rate of OCs in other automobile manufacturing enterprises should reach 50% or more.
(2) Furniture manufacturing industry. Focus on the province's large-scale wooden furniture enterprises, vigorously promote the use of water-based, UV-curing and other low-volatility coatings, the replacement ratio reached more than 30%, to verify the company's product output and paint purchase orders; vigorously promote the use of water-based adhesives, The replacement ratio is over 50%, which is verified by the company's product output and the adhesive purchase order. Strengthen the collection and treatment of waste gas, the organic waste gas collection rate is not less than 80%, and the end treatment measures such as incineration should be adopted for painting and drying waste gas. The comprehensive removal rate (including raw material substitution) of VOCs in wooden furniture manufacturing enterprises should reach 50% or more.
(3) Construction machinery manufacturing industry. Promote the use of high-solids coatings, the use ratio of more than 20%, to verify the company's product output and paint purchase orders. Strengthen the collection and treatment of waste gas, the organic waste gas collection rate is not less than 80%, and the painting and drying waste gas are treated by incineration. The comprehensive removal rate (including raw material substitution) of VOCs in construction machinery manufacturing enterprises should reach 50% or more.
(4) Steel structure manufacturing industry. Vigorously promote high-solids coatings, the use ratio of more than 20%, to verify the company's product output and paint purchase orders. Gradually eliminate the open-air spraying of steel structures, comprehensively promote the steel structure manufacturing enterprises to enter the workshop operation, and construct waste gas collection and treatment devices. The comprehensive removal rate (including raw material substitution) of VOCs in steel structure manufacturing enterprises should reach more than 30%.
(5) Coil manufacturing industry. The use of mechanized automatic roll coating technology is widely promoted; the collection of baking waste gas is enhanced, the collection rate is over 90%, and efficient treatment measures such as incineration are supported. The comprehensive removal rate of VOCs in coil manufacturing enterprises has reached more than 80%.
(6) Container manufacturing industry. In the whole process of sanding, in-box painting, exterior coating, chassis painting and wood coating, all the water-based coatings are used instead of solvent-based coatings. The replacement ratio is over 80%, and the company's product output and coating purchase order are used. Verify. For a sanding process, the roll coating process is promoted; the exhaust gas collection and treatment is enhanced, the organic waste gas collection rate is not less than 90%, and efficient treatment facilities such as solvent recovery and catalytic combustion are supported. The comprehensive removal rate (including raw material substitution) of VOCs in container manufacturing enterprises should reach 80% or more.
The "Proposal" proposes to strengthen the comprehensive management of VOCs in other industrial sectors. All localities should combine local industrial structure characteristics and VOCs governance priorities, and select other industrial industries to carry out VOCs governance according to local conditions. The electronic information industry should focus on strengthening the emission control of VOCs in solvent cleaning, lithography, gluing, painting, etc.; the footwear industry should focus on strengthening facial seam bonding, molding, group bottoming, painting, foaming, injection molding, printing, cleaning, etc. Process VOCs emission control; textile printing and dyeing industry should focus on strengthening emission control of printing and dyeing and finishing processes VOCs, strengthen the control of exhaust gas and printing waste gas; wood processing industry should focus on the treatment of VOCs in drying, gluing and hot pressing processes.
The "Proposal" proposes to comprehensively strengthen the prevention and control of VOCs in living sources. In terms of VOCs governance in the auto repair industry, the “Proposal” proposes to comprehensively ban open-air and open-air auto repair spraying operations. Promote the use of low-volatility coatings such as water-based and high-solids, and promote the coating process with high coating efficiency such as electrostatic spraying. Process operations such as painting, leveling and drying must be placed in the paint booth, using solvent-based coatings. The spray gun should be sealed and cleaned, and the generated VOCs should be collected and introduced into the treatment facility. Before June 30, 2017, the VOCs of 404 auto repair enterprises will be completed, and the comprehensive removal rate of VOCs will reach 50% or more.
The "Proposal" proposes to rectify and revoke the "scattering and pollution" enterprises involved in VOCs. Before the end of June 2017, 36,600 “scattering and pollution” enterprises identified in the province must be fully rectified according to the law, especially for chemical, casting, coating, ink, adhesive, organic solvent, etc. as early as possible. VOCs are directly in line with “scattering and pollution” enterprises, strictly in accordance with the standards of water and electricity cut-off, equipment removal, raw materials removal, and the “four in place” of the licenses are revoked, and resolutely put an end to the resurgence.
Related News
-
Six people from Suzhou Environmental Protection Bureau and Furniture Industry Association visited Qianchuang Environmental Protection Company for guidance.
-
Jiang Xiangqian from Qianchuang Environmental Protection participated in Quzhou Exhaust Gas Control Publicity Conference
-
Leader of Suzhou Environmental Protection Bureau + President of Suzhou Furniture Association visited our company
-
Leaders of Guangdong Provincial Department of Environmental Protection came to our company to inspect the purifier.
-
Visiting Cooperation of Automobile Repair Association
